View source for Engobe decoration

'''Engobe decoration''' is a ceramic surface decoration technique in which a layer of liquid clay mixture, known as an engobe, is applied to the surface of pottery before firing. The coating may be used to change the color of the surface, create decorative effects, or provide a base for further decoration.

An engobe consists of clay mixed with minerals or pigments and suspended in water to form a brushable or pourable slip. The mixture is typically applied to the clay body while the vessel is still in a leather-hard state. After application, the surface may be smoothed, carved, or decorated using various techniques.

Engobe coatings can be used to produce contrasting surfaces between the clay body and the outer layer. Potters may apply the coating by brushing, dipping, or pouring it onto the vessel. Once the engobe has partially dried, additional decoration such as carving or scratching may be added.

The technique can also serve as a base for other decorative processes. Methods such as [[Sgraffito]], [[Hakeme]], and [[Slip trailing]] often involve the use of engobe layers that are modified or decorated before glazing and firing.

After firing, the engobe becomes permanently fused with the ceramic body, creating a durable surface that may be left matte or covered with a transparent glaze.

== See also ==
* [[Sgraffito]]
* [[Kohiki]]
* [[Hakeme]]
* [[Slip trailing]]

[[Category:Artisanal techniques]]
[[Category:Ceramics artisanal techniques]]